Bladeless Fan

Tools, weapons, machines and other appliances - ask away!

Bladeless Fan

Postby Sunflowers » Tue Oct 13, 2009 12:10 pm

This sounds like an interesting gadget.
Minds, like parachutes, work best when open.
Do not condemn the judgement of another because it differs from your own. You may both be wrong. Dandemis
User avatar
Sunflowers
 
Posts: 449
Joined: Thu May 14, 2009 11:43 am
Location: Winchester, Hampshire, UK

Re: Bladeless Fan

Postby Elefino » Tue Oct 13, 2009 6:20 pm

Sunflowers wrote:This sounds like an interesting gadget.

Powered by a perpetual motion machine, no doubt :roll:
User avatar
Elefino
 
Posts: 746
Joined: Thu May 14, 2009 10:50 pm
Location: Los Angeles, CA, USA

Re: Bladeless Fan

Postby Sunflowers » Tue Oct 13, 2009 6:24 pm

Elefino wrote:
Sunflowers wrote:This sounds like an interesting gadget.

Powered by a perpetual motion machine, no doubt :roll:


:D!!! It probably will work because Dyson vacuum cleaners are very good and many of my friends use them so if he says it works then it probably does.
Minds, like parachutes, work best when open.
Do not condemn the judgement of another because it differs from your own. You may both be wrong. Dandemis
User avatar
Sunflowers
 
Posts: 449
Joined: Thu May 14, 2009 11:43 am
Location: Winchester, Hampshire, UK

Re: Bladeless Fan

Postby LA Bob » Wed Oct 14, 2009 1:32 am

I have a Dyson vac. It works OK and was pretty expensive (about $600).

Where the vac appeared to be innovative and its uses seemed intuitive, this bladeless fan idea seems more like an invention in search of a product in search of a market.

I wish him luck.

:)
8-) :) Virtually Employed
User avatar
LA Bob
 
Posts: 117
Joined: Sat May 16, 2009 4:54 am
Location: LA CA USA

Re: Bladeless Fan

Postby Matt » Wed Oct 14, 2009 2:22 am

Sunflowers wrote:This sounds like an interesting gadget.


I read about that in the newspaper this morning and they had a picture. It's a very cool looking device.

Image

Here's a short video about it.

I have decided I want one. :)
User avatar
Matt
 
Posts: 179
Joined: Sat May 16, 2009 2:20 pm
Location: Bangkok, Thailand.

Re: Bladeless Fan

Postby Greybeard » Wed Oct 14, 2009 5:51 am

But inside that canister at the base of the hoop, is still a fan with blades... The Good Lord is still the only one capable of moving air without fans...
Greybeard
 
Posts: 239
Joined: Sat May 16, 2009 9:47 pm
Location: Renton, WA

Re: Bladeless Fan

Postby weasley » Wed Oct 14, 2009 8:39 am

I read an early review that not only does this fan have blades (housed within the stand) but the motor is rather more noisy than that of a conventional desk fan and emits a noise akin to..... a vacuum cleaner! It implies that this is simply an alternative outlet for Dyson's air movement hardware (which is, in effect, all a vacuum cleaner is). Note that their only recent innovation that didn't move air (the washing machine with a contra-rotating drum) is no longer available, leaving us with some funky (and, I'll admit, very useable) vacuum cleaners, the Airblade hand drier and this new "air multiplier".
weasley
 
Posts: 118
Joined: Sat May 16, 2009 3:24 pm
Location: Berkshire, UK.... that's pronounced "barkshire"

Re: Bladeless Fan

Postby Little Beast » Wed Oct 14, 2009 10:16 am

Greybeard wrote:But inside that canister at the base of the hoop, is still a fan with blades... The Good Lord is still the only one capable of moving air without fans...

After eating lots of onions, I can do that trick too !
:oops: :oops: :oops:
--------------------
Create fear, offer a solution and you rule the world !
User avatar
Little Beast
 
Posts: 117
Joined: Sat May 16, 2009 5:21 pm
Location: Belgium

Re: Bladeless Fan

Postby Major Tom » Wed Oct 14, 2009 11:52 am

Greybeard wrote:But inside that canister at the base of the hoop, is still a fan with blades... The Good Lord is still the only one capable of moving air without fans...

Indeed, it has blades, I think their point is that most of the air is moved through the "air multiplier" rather than directly by the blades.
It sounds like they're trying to get some hype, I'm not sure justified one.
They're offering the 25cm model for $300 and the 30cm one for $330.

As to moving air without blades, I'm wondering whether a Tesla pump can be easily used for gas (as it is for liquids).

Major T.
Major Tom
 
Posts: 318
Joined: Sun Jun 28, 2009 8:58 am
Location: Medford, MA

Re: Bladeless Fan

Postby Phonedave » Thu Oct 15, 2009 12:46 pm

I thought it was going to be a magnetohydrodynamic drive, not a glorified fan with a baffle.

-dave
Phonedave
 
Posts: 247
Joined: Mon May 25, 2009 12:58 am


Return to Machines

Who is online

Users browsing this forum: No registered users and 1 guest